Anycubic Kobra S1 Combo

The numbered annotations on the product page correspond to the following explanations:
[1] The characteristics of TPU filaments make them only suitable for single-color, and they cannot be used together with ACE Pro for dual printing.
[2] It is necessary to connect two ACE Pro printers with an eight-color feeding module.
[3] For a smoother multi-color printing experience, it is recommended to use plastic filament spools.
[4] Comes with a standard 0.4 mm diameter hotend; additional nozzles of different diameters like 0.2 / 0.6 / 0.8 mm need to be purchased separately.
[5] The data provided is measured at 1 meter away from the front of the printer. Due to individual machine differences, the actual noise level may deviate from the advertised value, which is considered normal.

Start with PID tuning, then perform feedback compensation, and finally click on auto-leveling. After that, you can begin your printing journey. The entire process takes about 10 minutes.

It can perfectly print PLA, PETG, TPU (95A), ABS, and ASA. Additionally, it supports high-temperature materials such as PC, PA, carbon fiber, and glass fiber.

Yes, the machine supports both power-loss recovery and filament runout detection functions.

With the addition of ACE Pro, it supports multi-color printing. By connecting up to two ACE Pros, it can achieve 8-color printing.

The machine comes with built-in LED lights. You can turn on the LED lights to observe the model, and they also provide illumination for the time-lapse photography feature.

The machine operates at a noise level of approximately 44dB.

The recommended printing speed is 300 mm/s, with a maximum printing speed of up to 600mm/s and a maximum acceleration of 20,000 mm/s². The time to print a small boat (layer height 0.2mm) is approximately 13 minutes.

The standard nozzle is 0.4mm, and it supports a printing layer thickness range of 0.05mm to 0.28mm.

Yes, the Kobra S1 Combo 8-color printing Pack comes with an 8 colors Filament Hub for multi-color printing. However, please note that the 8 colors Filament Hub will be shipped separately.

Wait for the filament to cool completely before removing/unplugging the hotend. We do not recommend removing the hot end before the filament has cooled down. The molten filament may pull out the high temperature ceramic composite tube, causing cooled filament to accumulate inside the throat, which could affect the cleaning and reinstallation of the hot end.