
Tough Resin Ultra*1+Bio Resin*1+Plant-based Resin*1+Water-Wash Resin*1
Tough Resin Ultra:Low-Odor. This formulation is of low order and non-irritating, fostering a serene and comfortable printing environment. Its composition significantly minimizes volatile organic compounds, making it an environmentally-friendly and green choice.
Bio Resin:Eco-Friendly & Body-Friendly. Anycubic Bio Resin is formulated with biofriendly ingredients, making it less irritating and odorless. This resin has successfully met the CEN Toy Safety Standard EN 71-3 and has obtained several important biosafety certifications, such as tests for in vitrocytotoxicity, skin sensitization tests, and animal irritation tests by skin exposure.
Plant-based Resin:Truly Eco-friendly. Based on the market demand for green, safe and eco-friendly resins. Anycubic Plant-based Resin was launched to meet users' need, and it is made from soybean oil extract, truly environmentally friendly.
Water-Wash Resin:No chemical solvents required — rinse with water for easy, eco-friendly use.
- Shake the liquid resin before use.
- Clean the resin tank and the molding platform to keep the bottom of the resin tank in lighttransmission.
- Unscrew the cap and add it to the resin tank according to the equipment requirements.
- Select the correct print parameters and settings for printing.
- After printing, please use the matching tools for post-processing, including blade, diagonalpliers, tweezers, containers, gloves.
- ethanol(≥95%), lactate or isopropyl alcohol cleaning solution.
- A. Remove the printed model from the molding platform with a blade.
- B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then takenout and drained; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
- C. Proper processing, such as removing support, polishing, coloring, etc.
- The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
- Suggested operating temperature is 18-35'c, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60°C).
- If the resin pigment settles, it can be used after stirring or shaking.
- In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
- To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
- To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
- 1. The intensity of mercury lamp or LeD light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation)
- 2. The exposure time in the sun (summer) is around 1 hour
- 3. Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited
- 4. lt is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.
- Choosing a selection results in a full page refresh.