PLA Silk Dual/Tri-Color
Product Features
● Silk-Like Appearance Shining Glow
● Complete Compatibility
● Adhesion at Its Finest
🔥Buy 5KG, price as low as £20.60/kg
Couldn't load pickup availability
1KG*1 / Black Gold / UK
- 1KG*1 / Black Gold / UK
- 1KG*1 / Black Blue / UK
- 1KG*1 / Black Green / UK
- 1KG*1 / Black Purple / UK
- 1KG*1 / Pink Gold / UK
- 1KG*1 / Red Gold / UK
- 1KG*1 / Red Blue / UK
- 1KG*1 / Blue Green Purple / UK
- 1KG*1 / Red Yellow Green / UK
- 1KG*3 / Black Gold / UK
- 1KG*3 / Black Blue / UK
- 1KG*3 / Black Green / UK
- 1KG*3 / Black Purple / UK
- 1KG*3 / Pink Gold / UK
- 1KG*3 / Red Gold / UK
- 1KG*3 / Red Blue / UK
- 1KG*3 / Blue Green Purple / UK
- 1KG*3 / Red Yellow Green / UK
- 1KG*5 / Black Gold / UK
- 1KG*5 / Black Blue / UK
- 1KG*5 / Black Green / UK
- 1KG*5 / Black Purple / UK
- 1KG*5 / Pink Gold / UK
- 1KG*5 / Red Gold / UK
- 1KG*5 / Red Blue / UK
- 1KG*5 / Blue Green Purple / UK
- 1KG*5 / Red Yellow Green / UK
Color Type
Model Print
Product Parameters
| Net Weight | 1KG/Roll | Diameter | 1.75mm |
| Tolerance | ±0.05mm | Gross Weight | 1.26KG |
| Density | 1.25g/cm³ | Tensile Strength | 60.6MPa |
| Elongation at Break | >6.3% | Flexural Strength | 65MPa |
| Flexural Model | 2400-2800 MPa | Young's Mode | 2760 MPa |
| lzod lmpact Strength | 33KJ/㎡ | Melting Point | 164°C |
| Melt Index | 9g/10min | Heat Distortion Temperature | 53℃ |
ANYCUBIC PLA Silk Dual / Tri-Color filament
How to install consumables
1.Install the spool on the spool holder of a 3D printer, and preheat the nozzle.
2.Cut the top of the filament into a spire shape, and thread it into the extruder and feeding tube.
3.Manually push the filament through the feeding tube to the nozzle until the filament melts through the nozzle.
FAQs
Q: If I buy 3KG of filament, will I receive a 3KG roll of filament?
Q: If I buy 3KG of filament, will I receive a 3KG roll of filament?
A: When you purchase 3KG of filament, you will receive 3 rolls of 1KG each, not one roll of 3KG (same for other quantities).
Q: If I purchase "Random Color", how many colors of filament will I receive?
Q: If I purchase "Random Color", how many colors of filament will I receive?
A: Random color means the color is uncertain. We will send you the filament of the required color according to your needs. If you have no special requirements, or a certain color is out of stock, the color will be randomly selected, but we will guarantee to send you at least two colors of filament.
Q: What should I do if the filament I received has problems with quantity, color, or other problems?
Q: What should I do if the filament I received has problems with quantity, color, or other problems?
A: If there are any problems with the filament you received, please contact our support team for answers.
Q: Where can I learn about the settings for different filaments?
Q: Where can I learn about the settings for different filaments?
A: Click here to learn about filament settings here.
Q: Do all Anycubic filaments have an RFID chip?
Q: Do all Anycubic filaments have an RFID chip?
A: No, only PLA Pantone has an RFID chip. For filaments without RFID chips, you need to switch colors manually when printing.
- Choosing a selection results in a full page refresh.