![](http://uk.anycubic.com/cdn/shop/files/PLA_Slik_Dual_Tri_color_black_gold.jpg?v=1716449950&width=150)
1KG / Black Gold / UK
- 1KG / Black Gold / UK
- 1KG / Black Blue / UK
- 1KG / Black Green / UK
- 1KG / Black Purple / UK
- 1KG / Pink Gold / UK
- 1KG / Red Gold / UK
- 1KG / Red Blue / UK
- 1KG / Blue Green Purple / UK
- 1KG / Red Yellow Green / UK
- 1KG / Random / UK
- 3KG / Black Gold / UK
- 3KG / Black Blue / UK
- 3KG / Black Green / UK
- 3KG / Black Purple / UK
- 3KG / Pink Gold / UK
- 3KG / Red Gold / UK
- 3KG / Red Blue / UK
- 3KG / Blue Green Purple / UK
- 3KG / Red Yellow Green / UK
- 3KG / Random / UK
- 5KG / Black Gold / UK
- 5KG / Black Blue / UK
- 5KG / Black Green / UK
- 5KG / Black Purple / UK
- 5KG / Pink Gold / UK
- 5KG / Red Gold / UK
- 5KG / Red Blue / UK
- 5KG / Blue Green Purple / UK
- 5KG / Red Yellow Green / UK
- 5KG / Random / UK
Color Type
Model Print
Product Parameters
Net Weight | 1KG/Roll | Diameter | 1.75mm |
Tolerance | ±0.05mm | Gross Weight | 1.26KG |
Density | 1.25g/cm³ | Tensile Strength | 60.6MPa |
Elongation at Break | >6.3% | Flexural Strength | 65MPa |
Flexural Model | 2400-2800 MPa | Young's Mode | 2760 MPa |
lzod lmpact Strength | 33KJ/㎡ | Melting Point | 164°C |
Melt Index | 9g/10min | Heat Distortion Temperature | 53℃ |
ANYCUBIC PLA Silk Dual / Tri-Color filament
How to install consumables
1.Install the spool on the spool holder of a 3D printer, and preheat the nozzle.
2.Cut the top of the filament into a spire shape, and thread it into the extruder and feeding tube.
3.Manually push the filament through the feeding tube to the nozzle until the filament melts through the nozzle.
FAQs
Q: If I buy 3KG of filament, will I receive a 3KG roll of filament?
Q: If I buy 3KG of filament, will I receive a 3KG roll of filament?
A: When you purchase 3KG of filament, you will receive 3 rolls of 1KG each, not one roll of 3KG (same for other quantities).
Q: If I purchase "Random Color", how many colors of filament will I receive?
Q: If I purchase "Random Color", how many colors of filament will I receive?
A: Random color means the color is uncertain. We will send you the filament of the required color according to your needs. If you have no special requirements, or a certain color is out of stock, the color will be randomly selected, but we will guarantee to send you at least two colors of filament.
Q: What should I do if the filament I received has problems with quantity, color, or other problems?
Q: What should I do if the filament I received has problems with quantity, color, or other problems?
A: If there are any problems with the filament you received, please contact our support team for answers.
Q: Where can I learn about the settings for different filaments?
Q: Where can I learn about the settings for different filaments?
A: Click here to learn about filament settings here.
Q: Do all Anycubic filaments have an RFID chip?
Q: Do all Anycubic filaments have an RFID chip?
A: No, only PLA Pantone has an RFID chip. For filaments without RFID chips, you need to switch colors manually when printing.
- Choosing a selection results in a full page refresh.